Home › Mould development
Injection Mould Development and Maintenance
New tools developed with leading mould makers, trialled on our own machines, and maintained through their production life.
New moulds, built with leading mould makers
A moulded part is only as good as its tool. SYS Moulding develops moulds in partnership with established mould makers and manages the work end to end: part review, mould design approval, manufacture, trials on our machines and sample submission. Because we will be the ones running the mould in production, we push for a tool that cycles well and lasts.
What we manage for you
- Design for moulding. Draft, wall thickness, ribs, gate location and ejection are reviewed before steel is cut.
- Mould specification. Cavities, steel, cooling layout and mould life are agreed against your volume.
- Build follow-up. Progress is tracked with the mould maker so the date holds.
- Trials. T0 and T1 trials are run on our 80T to 220T machines, with corrections fed back to the mould maker.
- Sample approval. You receive parts from the final trial for sign-off before production starts.
Mould maintenance
Moulds wear. Vents clog, parting lines get damaged, ejector pins stick and cooling channels scale up. Left alone, that shows up as flash, burn marks, drag marks and longer cycles. Tools in production with us are cleaned, inspected and preserved after each run, and our mould-maker partners handle repairs and periodic refurbishment so the tool keeps giving good parts through its life.
One accountable supplier
Splitting the mould and the moulding between two vendors often ends in each blaming the other for a bad part. With SYS Moulding, the tool and the parts are one responsibility. See how a full project runs on the moulded components page, or check the machines the mould will run on.
Frequently asked questions
Do you make moulds in-house?
Moulds are built by specialist mould makers we partner with. We manage the project, run the trials on our own machines and take responsibility for the result.
Can you repair or maintain a mould I already own?
Yes. Moulds running with us are cleaned and preserved after every run. Repairs, polishing, insert replacement and refurbishment are done through our mould-maker partners with your approval.
What decides the cost of an injection mould?
Mainly part size and complexity, number of cavities, mould steel, the expected mould life, and features such as slides, lifters and hot runners. We quote the mould separately from the part price so you can see both.
Send us your part
Share a drawing, a sample or a photo with the material, part weight and yearly quantity. We reply with machine fit and a quotation.